Artamic Stain/Glaze Starter Kit
Artamic Stain/Glaze wurde speziell für die naturgetreue Reproduktion von Restaurationen aus Vollzirkonoxid, Zirkonoxid-Verbundkeramik und Lithiumdisilikat-Glaskeramik entwickelt. Dank des breiten Farbsystems, der lebendigen Fluoreszenz und des natürlichen Glanzes ermöglicht es Ihnen, die gewünschte Individualisierung und Charakterisierung sowie eine lebensechte Ästhetik der Restaurationen zu erzielen, die natürlichen Zähnen in nichts nachsteht.
99,90 € excl. VAT
Description
Instructions for use card (ENGL)
Instructions for use (ENGL)
Inhalt:
· 1 Flasche Glaze (2g)
· 1 Flasche Mischflüssigkeit (20ml)
· 2 Flaschen Stain (2g) (A, Blau)
Application: for staining/glazing zirconium oxide and glass-ceramic restorations
Preparation: Prepare the brushes, mixing palette and spatula for staining/glazing.
Instructions for use:
- Mix Artamic Stain/Glaze thoroughly with a metal-free spatula before each use.
- Make sure that the paint/glaze does not come into contact with water.
- It is recommended to use the color mixing palette during the mixing process to achieve the desired viscosity.
DO NOT ADD THE MIXING LIQUID DIRECTLY TO THE BOTTLE.
- The temperature in the furnace for the glazed restorations should not exceed 450 °C.
- Conduct the glaze firing under vacuum.
- Seal the unused material well for the next use and avoid long-term storage in an environment with high humidity.
| Drying process | Heating | Fire | Furnace opening | ||
| Start temp. | Duration | Heating rate | Target temp. | Duration | Temp. |
| (°C) | (min.) | (°C/min.) | (°C) | (min.) | (°C) |
| 450 | 6 | 45 | 740 | 3 | 600 |
- CTE（25-500℃）（10.3±0.5）*10-6 K-1
- Chemical solubility<100μg/cm2
- Flexural strength>50Mpa
- Storage conditions
Store in a dry place at room temperature
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.