Palladar SF

Description

 

Type:	Goldreduzierte Gusslegierung Typ 4 (extrahart) gem. DIN EN ISO8891
Colour:	white

 

Applicable scope:
	● Brücken
	● Fräs-, Steg- und Geschiebearbeiten
	● Kronen

 

Composition:	Au	3,0
(mass fraction in %)	Pd	30,0
	Ag	55,5
	Zn	1,5
	Cu	10,0

 

 

Technical specifications:	Density in g/cm³	11,1
	Vickers hardness HV 5/30	as modeling alloy	(s) 175
	Yield strength Rp0,2 in MPa	as modeling alloy	(s) 450
	Elongation at break in %	as modeling alloy	(s) 16
	Zugfestigkeit Rm MPa	as modeling alloy	(s) 600
	Elastic modulus in GPa	100
	Melting interval in °C	950 – 1040

 

Processing:	Preheating temp. of the casting moulds in °C	700
	Casting temperature in °C	1140
	Crucibles	Graphite/ceramic
	Curing	self-curing

 

Suitable solders:	Joints before ceramic firing	AL 800
	Joints after ceramic firing	AL 750

1) Brief description: 

     s – self-curing, n – after ceramic firing, a-s – curing from s condition

     a-n – curing from n condition

2) All information about cured condition is given according to the alloy:

     – Oxide firing 10min/ 960°C + 4x4min/ 960°C for yellow conventional bonding alloys

     – Oxide firing 10min/ 980°C + 4x4min/ 980°C for white conventional bonding alloys

     – Oxide firing 10min/ 800°C + 4x4min/ 800°C for LFC-systems

   Corresponding data are true under these conditions only.

3) The ceramic firing should be carried out according to the manufacturer's instructions.