Artamic Stain/Glaze Liquid H / Liquid
Artamic Stain/Glaze was specially developed for the lifelike reproduction of restorations made of all-zirconium oxide, zirconium oxide composite ceramics and lithium disilicate glass-ceramics.
- Bottle of 20ml
49,90 € excl. VAT
Description
Instructions for use card (ENGL)
Instructions for use (ENGL)
Application: for staining/glazing zirconium oxide and glass-ceramic restorations
Preparation: Prepare the brushes, mixing palette and spatula for staining/glazing.
Instructions for use:
- Mix Artamic Stain/Glaze thoroughly with a metal-free spatula before each use.
- Make sure that the paint/glaze does not come into contact with water.
- It is recommended to use the color mixing palette during the mixing process to achieve the desired viscosity.
DO NOT ADD THE MIXING LIQUID DIRECTLY TO THE BOTTLE.
- The temperature in the furnace for the glazed restorations should not exceed 450 °C.
- Conduct the glaze firing under vacuum.
- Seal the unused material well for the next use and avoid long-term storage in an environment with high humidity.
| Drying process | Heating | Fire | Furnace opening | ||
| Start temp. | Duration | Heating rate | Target temp. | Duration | Temp. |
| (°C) | (min.) | (°C/min.) | (°C) | (min.) | (°C) |
| 450 | 6 | 45 | 740 | 3 | 600 |
- CTE（25-500℃）（10.3±0.5）*10-6 K-1
- Chemical solubility<100μg/cm2
- Flexural strength>50Mpa
- Storage conditions
Store in a dry place at room temperature
Additional information
| Stain/Glaze variant | A (2g), A (6g), B (6g), C (6g), D3 (6g), D4 (6g), Blue (2g), Blue (6g), Violet-grey (6g), Red (6g), Violet-red (6g), Light pink (6g), Pink (6g), Yellow (6g), Orange-pink (6g), Brown (6g), Light brown (6g), Red-brown (6g), terracotta (6g), orange (6g), black (6g), white (6g), glaze (2g), glaze (6g), 3D light pink (6g), 3D orange-pink (6g), 3D glaze (6g), blending liquid (10ml), blending liquid (20ml) |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.